Cmsnl.com Honda Xr200r 1999 (x) Usa Serial Numbers - schematic partsfiche 1500 × 970 - 194k - gif cmsnl.com Honda Atc200es Big Red 1984 (e) Usa Serial.

I think you need a spacer plate. It sounds like you have an 87-89 long rod and an 86 piston in it. That would make the piston come up too far. If you look around there is all the info you need, or wait till wilkin's or beerock see's this thread, they know more than I. One thing I do know is that the numbers on the engine won't tell you anything.

You have to check the numbers on the piston and rod. I have seen a thread not too long ago that compleatley explained everything with the numbers for the pistons and rods from different years. I'll try to find it. Originally posted by bananas No, something is different, the piston is coming up to far.

Not sure of the Year of the engine. Honda is no help. I called 4 dealers. Waste of time.

Someone must have a book with the serial number for the engine. I have the serial numbers for TRX250 for 86 to 89. I Brought it to a shop and they were confused. Please Help.Thanks Most dealers don't want to take the time to look info like this up for you, and every one of them should have the book required to do this.

You are in luck, since I have the book. The motor is out of an 86 ATC. The TB06E means its out of an ATC, the 2509951 is the sequence number and tells me it's an 86. If the number began with 24 it would be an 85. For future reference 86 TRX TE12E-1000001 87 TRX TE12E-8000001 88 TRX TE06E-8100001 89 TRX TE06E-8200001 These are all the beginning sequence numbers starting with the first motor built each year.

There is indeed a difference between the two years other then the clutch cable. I accidentally figured it out today when I pulled my left side cover off to change my shifter shaft seal. Its hard to explain but in 86 they changed the way the oil flows by removing part of the casting in the cover. The only reason why I noticed is because part of my gasket didn't match the inside of the cover in one spot but it did match the crankcase side. Yes I have a cover off of an 86 on an 85 engine. Installsoft russkaya ribalka 36 video. I was worried at first but when I studied the parts fiche and if I'm reading it correctly the cover for the 86 is interchangeable with the 85 engine but the 85 cover is NOT interchangeable with the 86 engine. So I think I'm OK.

So for those of you thinking about that electric start make sure you know what year engine you have.