~~~***~~~ ================================================== ================================================== ENTER HERE: >>.

Posted on Tuesday, November 04, 2008 - 19:22 GMTPlymouth, As I informed you before: Loading the wrong bin file resulted in 0000 on the receiver display and a green TV screen. Both the forwarded factory file and bin file 2.05 were loaded, as advised. The video image consists of colors scattered all over the screen 2. Pressing 'Menu' on the remote control switches the receiver off 3.

Pressing 'EPG' produces a PIP screen 4. No list appears on pressing 'FAV' Hope this additional information will assist in finding a solution. Appreciate your support. Please advise. Regards, Eugene.

CaptiveWorks CW-600S Premium FTA Receiver. From Free Knowledge Base- The DUCK Project: information for everyone. The CW-600S Premium has a Cx24142 processor and 4mb flash memory. Now click on the file folder graphic and select the correct bin. Captiveworks files drivers loader Download bin cw ultima, CW1000S bin, CW100R bin, cw3000 bin, CW4000HD bin, cw600p bin, cw600s bin, CW650 Classic bin, cw700s bin, cw800s. Captiveworks bin Files. Captiveworks divers files. Captiveworks loader files. Donate to site.

Posted on Tuesday, November 04, 2008 - 19:45 GMThey young albert try this it may help.courtesy of crazyfta.net CaptiveWorks CW-600S - Loaded Wrong Bin File Problem - Repair Guide What to do when you accidentally loaded the wrong bin file. CaptiveWorks receivers are very forgiving. Either the CaptiveWorks CW-600S or the CW-600S Premium can fix itself. Just do the following.

STOP - Do NOT try to put the correct bin on anymore. Power off the receiver from the rear power switch. Turn on the power ON from the rear AND at the same time hold in the front power button for 5 seconds. The receiver will display 'BOOT' and it is now in boot mode. That is what we want, and you can let go off the front power button when this is displayed. Now, load the factory bin file. Next, Load the CORRECT new bin file this time.

Activate patch. (F1 and 000) 7. Setup dish antennas and scan channels.

Fiatecuscan 341 crack full version free software download. There you go, your CaptiveWorks CW-600S receiver is now back up and running!!